Riso SF Series User Manual page 179

Problem
Papers are not smoothly fed
from the paper feed tray.
(Papers are skipped, or mul-
tiple sheets are fed)
Point to check
Check if appropriate papers
are used.
Check if the position of the
paper feed setting lever is
appropriate.
Check if the angle of the
stripper plate is appropriate.
Action
Use papers that are suitable for this machine.
(A 15 "Printing papers")
When using thick or slippery papers, switch the
paper feed setting lever to the position of [CARD].
(A 32 "Setting up the paper feed tray and the
paper")
Turn the adjustment dial for the stripper plate angle
to adjust the angle of the stripper plate in accor-
dance with the paper conditions.
BBefore the adjustment, be sure to
remove any papers from the paper feed
tray, and then confirm that the paper
feed tray has lowered to the bottom.
■ When papers are skipped
Turn the dial counterclockwise.
■ When multiple papers are fed
Turn the dial clockwise.
Chapter 11 Troubleshooting
177
11