Setup; Changing From Desktop To Tower Orientation - HP EliteDesk 705 G4 Desktop Mini Hardware Reference Manual

2

Setup

Changing from desktop to tower orientation

The computer can be used in a tower orientation with an optional tower stand that can be purchased from HP.
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as a USB flash drive, from the computer.
3. Turn off the computer properly through the operating system, and turn off any external devices.
4. Disconnect the power cord from the AC outlet and disconnect any external devices.
IMPORTANT:
as the system is plugged into an active AC outlet. To prevent damage to internal components, you must
disconnect the power cord from the power source before opening the computer.
5. Orient the computer so that its right side is facing up and place the computer in the optional stand.
NOTE:
stand.
6. Reconnect the power cord and any external devices, and then turn on the computer.
4 Chapter 2 Setup
Regardless of the power-on state, voltage is always present on the system board as long
To stabilize the computer in a tower orientation, HP recommends the use of the optional tower