Table of Contents
Advertisement
4
Tighten the cable set screw while pulling the cable taught.
Tighten the cable set screw while pulling the cable taught.
5
Actuate the handlebar remote 5 times from the unlocked to locked out
Actuate the handlebar remote 5 times from the unlocked to locked out
position to tension and set the cable.
position to tension and set the cable.
6
Actuate the handlebar remote to the unlocked position.
Actuate the handlebar remote to the unlocked position.
Loosen the cable set, pull the cable taught with needle nose pliers, and
Loosen the cable set, pull the cable taught with needle nose pliers, and
tighten the cable.
tighten the cable.
7
Actuate the handlebar remote to the locked out position, compress the
Actuate the handlebar remote to the locked out position, compress the
rear suspension on a flat surface, and confirm the shock locks out fully.
rear suspension on a flat surface, and confirm the shock locks out fully.
Repeat if necessary.
Repeat if necessary.
2 mm
Unlocked (x5)
2 mm
Locked Out
Remote Cable Installation and Check Lockout Function
Locked Out (x5)
2 mm
Needle nose pliers
75
Advertisement
Table of Contents
