Table of Contents
Advertisement
6
Rotate and align the 4 eyelet bolt holes with the 4 bolt holes on the
Rotate and align the 4 eyelet bolt holes with the 4 bolt holes on the
IsoStrut air can.
IsoStrut air can.
Push the eyelet/mount in towards the IsoStrut air can until one bolt can
Push the eyelet/mount in towards the IsoStrut air can until one bolt can
be threaded into the IsoStrut air can bolt threads.
be threaded into the IsoStrut air can bolt threads.
While applying pressure to the eyelet/mount, carefully install and
While applying pressure to the eyelet/mount, carefully install and
thread one bolt through the eyelet/mount bolt hole and into the
thread one bolt through the eyelet/mount bolt hole and into the
IsoStrut air can. Thread the bolt in two full rotations.
IsoStrut air can. Thread the bolt in two full rotations.
7
Install the second bolt into the hole located diagonally and thread it in
Install the second bolt into the hole located diagonally and thread it in
two full rotations.
two full rotations.
Install the third above the second, then the forth bolt and thread each
Install the third above the second, then the forth bolt and thread each
two full rotations.
two full rotations.
Thread each bolt in until the eyelet is flush against the IsoStrut air can.
Thread each bolt in until the eyelet is flush against the IsoStrut air can.
4 mm
4 mm
4 mm
4 mm
4 mm
IsoStrut Air Can Installation
71
Advertisement
Table of Contents
