Table of Contents
Advertisement
16
Insert one spring tang into the hole in the remote lockout cam.
Insert one spring tang into the hole in the remote lockout cam.
Insert the other spring tang into the remote lockout preloader and seat
Insert the other spring tang into the remote lockout preloader and seat
the preloader centered in the remote spring.
the preloader centered in the remote spring.
17
Insert the remote lockout cam, spring, and preloader into the eyelet/
Insert the remote lockout cam, spring, and preloader into the eyelet/
mount. Hold the outer cam bushing on the other side in with your
mount. Hold the outer cam bushing on the other side in with your
finger.
finger.
Seat the end of the cam into the outer cam bushing.
Seat the end of the cam into the outer cam bushing.
Use a 4 mm hex wrench to push the preloader into the eyelet/mount,
Use a 4 mm hex wrench to push the preloader into the eyelet/mount,
compress the remote spring, and fully seat the end of the cam through
compress the remote spring, and fully seat the end of the cam through
the outer cam bushing.
the outer cam bushing.
4 mm
4 mm
47
Remote Spring Service
Advertisement
Table of Contents
