Table of Contents
Advertisement
6
Insert the pick into the center of the damper shaft and install the piston
Insert the pick into the center of the damper shaft and install the piston
assembly onto the damper shaft. Center the parts onto the square end
assembly onto the damper shaft. Center the parts onto the square end
of the damper shaft.
of the damper shaft.
Remove the pick after the piston assembly is installed and secured on
Remove the pick after the piston assembly is installed and secured on
the damper shaft.
the damper shaft.
If the damper piston assembly is disassembled, it will need to be
replaced.
If any piston assembly parts are installed in the incorrect order,
the piston assembly, including the tune shim stacks, must be
reassembled in the correct order for proper shock function. Refer
to the Rear Suspension Shim Tuning Guide for piston assembly and
shim stack configurations.
NOTICE
Pick
Sealhead / Air Piston Installation
Pick
57
Advertisement
Table of Contents
