SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 35

3 Insert a pick into one valve hole in the valve slider and carefully lift the Insert a pick into one valve hole in the valve slider and carefully lift the
valve slider up. Remove the valve slider and compression poker, and valve slider up. Remove the valve slider and compression poker, and
set it aside. set it aside.
Do not damage the valve slider.
4 Remove the o-ring from the compression poker and discard it. Remove the o-ring from the compression poker and discard it.
Clean the compression poker. Clean the compression poker.
Apply grease to a new o-ring and install it onto the compression poker. Apply grease to a new o-ring and install it onto the compression poker.
Set the compression poker aside. Set the compression poker aside.
Do not scratch the compression poker. Scratches will cause oil to
bypass the o-ring seal.
Do not remove or lose the detent ball installed into the end of the
compression poker.
NOTICE
NOTICE
Pick
Pick (non-metallic)
RockShox Suspension Cleaner RockShox Dynamic Seal Grease
35
Damper Piston Removal