Page 1
13.5 maxi mum braking torque of 250 Nm (2200 in.lbs.) on the rear wheel no residual deformation can occur on the rear structure. Ø 7.3 SRAM S7 with coaster brake SRAM S7 without brake Type MH 7215 MH 7205 Brake...
Page 3
® SRAM ASSEMBLY Caution: • Turn dust cap (7, Fig. 3) until the three • Check that shifter and brake lever lugs (8) are between the three beads (9) on the sprocket (10). can be easily operated (if necessary, • Position dust cap and push towards realign).
® SRAM MAINTENANCE R E A S S E M B L Y H U B • Clamp other axle end (groove for Clickbox is facing downwards). see Fig. 1 • Assemble hub shell (6) with a slight Lubrication see “...