SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 63

8 Confirm the nylon compression ball is removed from the sealhead/air Confirm the nylon compression ball is removed from the sealhead/air
piston. Oil should be able to purge out of the sealhead/air piston bleed piston. Oil should be able to purge out of the sealhead/air piston bleed
port during installation. port during installation.
9
Slide the sealhead/air piston up and away from the piston until it stops Slide the sealhead/air piston up and away from the piston until it stops
against the bumper. against the bumper.
Insert the damper piston into the damper fluid and damper body and Insert the damper piston into the damper fluid and damper body and
carefully push the piston into the damper body. Suspension oil will carefully push the piston into the damper body. Suspension oil will
displace through and around the piston as it is inserted. displace through and around the piston as it is inserted.
When the piston is submerged, push the sealhead/air piston down When the piston is submerged, push the sealhead/air piston down
firmly and square onto the damper body and engage the threads. firmly and square onto the damper body and engage the threads.
Thread the sealhead/air piston onto the damper body until it stops. Thread the sealhead/air piston onto the damper body until it stops.
Do not cross-thread the sealhead/air piston and damper body
threads.
Suspension oil will purge through the sealhead/air piston bleed hole. Suspension oil will purge through the sealhead/air piston bleed hole.
NOTICE
63
IFP Installation and Bleed