SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 52

5 Remove the rebound adjuster. Remove the rebound adjuster.
Clean the rebound adjuster. Clean the rebound adjuster.
6
Clean the eyelet/mount around the rebound adjuster slot. Clean the eyelet/mount around the rebound adjuster slot.
Do not push contaminates into the eyelet/mount. Contaminates can
damage parts or interfere with proper adjuster functions.
7 Apply grease to the detents. Apply grease to the detents.
8 Insert the rebound adjuster into the eyelet/mount with the limit screw Insert the rebound adjuster into the eyelet/mount with the limit screw
stop aligned upward with the limit screw hole in the eyelet/mount. The stop aligned upward with the limit screw hole in the eyelet/mount. The
limit screw stops against this surface when the rebound adjuster is limit screw stops against this surface when the rebound adjuster is
rotated to the full open position. rotated to the full open position.
Press the rebound adjuster into the eyelet/mount until it stops. Press the rebound adjuster into the eyelet/mount until it stops.
NOTICE
RockShox Suspension Cleaner
RockShox Dynamic Seal Grease
Rebound Adjuster Service (optional)
RockShox Suspension Cleaner
52