SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 18

2 Insert the IsoStrut Air Can Seal Sleeve Removal Puck onto a long Insert the IsoStrut Air Can Seal Sleeve Removal Puck onto a long
5/8" socket extender. Insert the removal puck into the IsoStrut air can 5/8" socket extender. Insert the removal puck into the IsoStrut air can
through the eyelet end until the edge of the puck tool stops against the through the eyelet end until the edge of the puck tool stops against the
seal sleeve. seal sleeve.
Push the seal sleeve out of the IsoStrut air can. Hold a shop towel Push the seal sleeve out of the IsoStrut air can. Hold a shop towel
around the end of the IsoStrut air can if excess grease and oil are around the end of the IsoStrut air can if excess grease and oil are
present on the seal sleeve. present on the seal sleeve.
3 Remove and discard the outer o-ring and bushing. Remove and discard the outer o-ring and bushing.
IsoStrut Air Can Negative Seal Sleeve
Removal Puck and socket extender
18
IsoStrut Air Can Service