Table of Contents
Advertisement
QB-RL78G1F In-Circuit Emulator
1.5 System Configuration for Each Target Device
The following table lists the system configuration for each target device of the QB-RL78G1F.
The adapter and connector for each device, and common probe and adapter are sold separately.
Remark
For the package drawings of the connector, adapter and probe, refer to the following URL.
http://www.renesas.com/iecube/rl78
Target Device
Package
RL78/G1F
24NA
32FP
36LA
48FB
64FB
Check pin adapter
Emulation probe
Note. FG(Frame-GND) is not connected. Please connect the GND pin on the QB-144-CA-01 to the nut
on the bottom of the QB-RL78G1F by a wire.
R20UT3352EJ0100 Rev.1.00
Jan 30, 2015
Table 1-5. Adapters and Connectors for Each Target Device
Exchange Adaptor
Space Adaptor
QB-24NA-EA-03S
QB-32FP-EA-04T
QB-32FP-YS-01T
QB-36LA-EA-02T
QB-48FB-EA-01T
QB-48FB-YS-01T
QB-64FB-EA-01T
QB-64FB-YS-01T
Table 1-6. Common Adapter and Probe
Name
QB-144-CA-01
QB-80-EP-01T
YQ Connector
-
-
QB-32FP-YQ-01T
-
-
QB-48FB-YQ-01T
QB-64FB-YQ-01T
Part Number
Note
RL78/G1F
RL78/G1F
CHAPTER 1 GENERAL
Target Connector
QB-24NA-TC-01S
QB-32FP-NQ-01T
QB-32FP-HQ-01T
QB-36LA-NQ-01T
QB-48FB-NQ-01T
QB-48FB-HQ-01T
QB-64FB-NQ-01T
QB-64FB-HQ-01T
Target Device
Page 14 of 41
Mount Adaptor
-
-
Advertisement
Table of Contents
