Kind 9 (13-34) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 9 (13-34)

Item Description
13 Route for calling operator
14 Station number of fax machine
15 Code for waiting
16 Waiting time after press the waiting code
st
17 1 Language code (English)
nd
18 2 Language code (Record by user)
rd
19 3 Language code (Record by user)
20 Code for off line detecting
21 Code for programming
22
23 Password for remote recording
24 Password for special event recording
25 Password for remote programming
26 Max. recording time
27
28 Operating mode on daytime
29 Operating mode on nighttime
30 Operating mode on lunch break
31 Operating mode on special event 1
32 Operating mode on special event 2
33-0:The frequency of busy tone
33-1: Max. interval time of busy tone
33-2: The frequency of dial tone
33 33-3: Max. interval time of dial tone
33-4: The frequency of FAX signal
33-5: Max. interval time of FAX signal
33-6: Volume for playing greeting
34 Department code
Default
0: Circulating (First operator– Last operator)
1: From the 1
2: From the last operator
0
3. Circulation (Last operator – First operator)
Related program: K2 item 31-32 set to 2 or 3
(operator), K2 item 73
Enter the station number
0-9, *, #
**: no waiting code (prohibit to keep the line
# waiting )
Application: Enable the caller to hold this line
waiting by pressing the code.
(transfer frequency) x (this item value)
08
Eg.: 5x08 = 40 seconds
0~9, *, # or none code for foreign language
*
#
3321
3321
....
600 10-3600 seconds
The program items are as following table (K9
item 33); please refer to K9 item 01 to program
the necessary parameters
3 0: no detect
40 1-9.9 seconds
3 0: no detect
40 1-9.9 seconds
3 0: no detect
50 1-9.9 seconds
40 0-63 dB
0-9: 1 digits
10-99 : 2 digits
Available for station Lxx
Application: Enable to program a speed dialing
code (1-2 digits) to ring the attendant station(s)
on the same department/group.
71
Instruction
st
operator (K2 item 73)