Kind 3 (32-41) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 3 (32-41)

Item
Transmission volume of CO to CO call
32
forwarding
33 Transmission volume on speaking
The color of indicator LED for CO using
34
condition
35 "Off" time of pulse dialling
36 "On" time of pulse dialling
37 Redial by pressing [REDIAL] key
38 Group control
39 Hot line telephone no. on daytime
40 Hot line telephone no. on nighttime
41 Auto dial-out the hotline setting
Description Default
00-63 scales (standard value: 40, unit: 1 dB)
Application: To adjust the transmission volume
while active the CO-CO call forwarding
30
Trunk P BX
00-63 scales (standard value: 40, unit: 1dB)
Application: To adjust the transmission volume
of trunk line when the callee responses the
caller's volume is too high/low.
40
0: Red only
1 1: Green/ Red light for dual color LED display
keyphone.
09 - > 10 PPS 33% (match to K3 item 36)
11 - > 10 PPS 40%
04 - > 20 PPS 33%
10
05 - > 20 PPS 40%
Note: Available for analog CO line and under
K3 item 1 is set at "2".
21 - > 10 PPS 33% (match to K3 item 35)
19 - > 10 PPS 40%
20
11 - > 20 PPS 33%
10 - > 20 PPS 40%
0: No
1: Yes
Application: When the external equipment is
1
connected to CO line, Redial is unnecessary on
this line. Eg.: Doorphone or external amplifier.
Related function no. 4, 19, 22, 34, 46
0: Uncontrolled
1: Controlled by group
Application: Install the doorphone on this trunk
1
port. Eg.: If K3 item 9 is set at " 4 " (doorphone)
then this item should be set at " 0 ".
Related program: K2 item 44-45, K3 item 75
A. Enter the telephone number of the hot line.
-----
(When the first digit was entered [*], the
prior telephone number will be cleared.)
-----
Related program: K3 item 41, function no. 34
0: No
0
1: Yes (According to K3 item 39-40)
52
Instruction
Volume
Trunk
Adjus tment
Volume
P BX Trunk
Adjus tment