Kind 2 (143-161) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 2 (143-161)

Item
Enable to retrieve the holding line by
143
pressing "HOLD" key
144 To turn off the earphone automatically
145 Ringing mode of earphone
146 Setup for station billing
Setup of voice discrimination for external
147
voice mail box (Inbound)
148 Display the message of missed call
149
150
To active the intercom handsfree function
151
of the received speaker
Call block - call the operator or Group
152
service only
153 Enable to setup the CO forwarding
154 Enable to check individual CID number
Enable to forward into VM when active
155
DND function
156 Push-to-talk button
157 Send the extension describer No. (IP line)
158 Whether to send the station billing
159
160
161 Station call restriction
Description Default
0: No
0
1:Yes
0: No
0 1: Yes
Applicable to keyphone with earphone interface
0: Only rings on keyphone
1: Rings on both of keyphone & earphone
0
2: Only rings on earphone
Applicable to keyphone with earphone interface
0: No metering
1 1: Metering
Relative program: K2 Item78
0: Unused
0
1: Use (Also set kind 2, item 81 to be "1")
0: No
0
1: Yes (only for display keyphone)
0: No
2 2: Yes (but without alert vocal)
3: Yes (with alert vocal)
0: No block
1: Only allows to call the operator
0 2: Only allows to call the group service
3: Allows to call both operator and group service
Can't call another station when select 1-3.
0: No
0
1: Yes
0: No
1
1: Yes
0: Yes (Incoming call forward to VM directly
1 when active DND function)
1: No
0: Start to communicate after pressing # or F80
1
1: No use
0: No
0 1: Yes
Linemex/Uniphone system only
0: No
0
1: Yes
0: Null
0 1: Station black list (prohibited table)
2: Station white list (allowed table)
47
Instruction