Kind 3 (76-97) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 3 (76-97)

Item
76
77
78
79
80
81
82
83
84 The starting digit of Caller-ID
85 The ending digit of Caller-ID
Time of receiving Caller-ID data after
86
ringing
87
88
89
90
90
92 Minimum time to start charging
93 Allowing the other party's recording
94 Pointer for starting to execute LCR
95
96
97
Description Default
Setting value: 0-16
1:0
It will not send the digit when the value is "16".
0 1 2 3 4 5 6 7 8 9 *:11 #:12 A:13 B:14 C:15 D:10
Application: when the local CO incoming type
1: 5
(such as *, #, A, B, C, D) is different from the
initial parameter.
0~9999 ms
Application: When incoming type is to ring first
0000 and send Caller ID no. in case of picking the
phone too early to receive the incoming call data.
(ex. for when match to DISA)
0-99 seconds
0 Start sending the simple running account after the
setting time by dialing the outgoing telephone no.
0: Not allowed
1: Allowed
Remark: This program is only workable for using
1 voice mail card on the system.
Application: Need to record the telephone
conversation on the line.
Related program: kind 2 item 129
Used for Call Forwarding-CO to CO
Refer to the example instruction of LCR.
0000
Related program: kind 3 item 73,
function no. 18, 23
55
Instruction