Kind 1 (26-38) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 1 (26-38)

Item
26
27 Route for auto-grabbing station
28 Time units of tone break bit
CO pulse interval between code and code
29
dialing
30 Route for auto-grabbing trunk line
31 Programming Password
32
Restricted/Allowed dialing table for 2nd
class: City call service class
33
LC2=0: 0 1 2 3 4 5 6 7
Restricted/Allowed dialing table for 3rd
class: National call service class
34
LC3=0: 1
Restricted/Allowed dialing table for 4th
class: International call service class 1
35
LC4=0:
Restricted/Allowed dialing table for 5th
class: International call service class 2
36
LC5=0:
Restricted/Allowed dialing table for 6th
class: International call service class 3
37
LC6=0:
Restricted/Allowed dialing table for 7th
class: International call service class 4
38
LC7=0:
Description
2 3 4 5
2 3 4 5
3 4 5
4 5
5
Default
0: Circulation (First STA – Last STA)
1: From the 1st STA
2: From the last STA
0
3. Circulation (Last STA – First STA)
Related program: K2 item 73, function no.43
164-9999 ms
200
Related program: K8, K18
1-9999 x 3.333 ms
TRK to PBX. It is interval time of "code to
233
code" when analog CO line is pulse dialing.
0: Circulating (First CO– Last CO)
1: From the 1st CO line
2: From the last CO line
0
3. Circulation (Last CO – First CO)
Relative program: K3 Item9,24
4 Digits code.
2656
Notice: DIP SW2 of CPU card must be "ON".
01234567
.12345...
Setting value: 0-8
For outward dialing restriction, match to program
..2345...
K7 (Restricted/Allowed dialing table)
0-5: Restricted table (Barring Call)
6-8: Allowed table
...345...
There are 30 groups of number per table.
Related program: K2 item 39-40
....45...
.....5...
26
Instruction