Station Line Program : Kind 2 - Uniphone ISDK-26 Basic Installation & Programming Manual

2.5 STATION LINE PROGRAM : Kind 2

To program the station parameter, or individual ringing tone, class of service and functions.
Enter Kind
2
Number
Item
00 Usage status of station
01 Enable to use "Do Not Disturb" function
Install a different type of interface on the
02
original stack/layer
03 Ringing tone
04 Exclusive hold
05 Grab CO line directly
06 Group pick-up
07 Increasing ring
4 2 6
HOLD
Description
or setting
LCD
5 6
password
screen:
Enter Item
2 0
number
Default
0: in use
0
1: Null
0: No
0 1: Yes
Related function no. 11, 27-29
0: Yes, Variable (Re-program is necessary if
install a different type of interface. Eg.:
0
change TRK-4 to SLT-4)
1: No
0: Apply to caller's setting (match to K2 item
109)
1: According to K8 item 35
0 2: According to K8 item 32
3: According to K2 item 111-114
Application: Enable to play the caller's ringing
tone on receiver's keyphone.
0: No
1: Yes (press "Hold" twice to active it)
0
Application: The held line will unable to grabbed
by other party.
0: No, according to the class of service
1: Yes, grabbing CO line directly by lifting the
handset.
0 Application: To install the emergency phone on
public site (K2 item 39 = 0 the class of hot line)
Related programs: K2 item 39-40, 44-45, 47-
48, K3 item 2-3
0: No
1: Yes (allow to pick up the ringing station on the
same group)
1 Application: The extensions on Service center are
all the same ringing group. they may answer the
phone even the call rings on another extension.
Related programs: K 2 item74-75,function no. 6-8
0: Off
1: Yes (match to K1 item 76)
Description: set the ring tone to start at the lowest
0
volume and get progressively louder until it
reaches the loudest volume.
Related program: K1 item 76, K2 item 37
36
**PGM VER 2.20**
Welcome UD SET
Instruction