Co/Isdn/Voip Line Program: Kind 3 - Uniphone ISDK-26 Basic Installation & Programming Manual

2.6 CO/ISDN/VoIP LINE PROGRAM: Kind 3

To program the parameter, class of service, priority, restriction and ring of trunk line.
3
Kind 3
Item
00 Usage status of CO line
01 Dialling type
02 Trunk group on daytime
03 Trunk group on nighttime
04 Trunk ringing group on daytime
05 Trunk ringing group on nighttime
06
07
08 Change the type of installed interface
09 Connecting line type of the CO line
10 Incoming directive on daytime
11 Incoming directive on nighttime
4 2 6
HOLD
0
Description
or setting
LCD
5 6
password
screen:
CO line
1
HOLD
No.
Default
0: In use
1: Invalid/Faulty
0
Application: Prevent to grab an invalid/faulty
CO line
0: None (When K3 item 9 is programmed to be
2, this item should be " 0 ")
1
1: DTMF (Related program: K1 item 8)
2: Pulse (Related program: K3 item 35-36)
0-9999 groups
0
Relate programs: K2 item 44-45, K3 item 38
Application: Enable to control outgoing call
0
by clustering to different group.
0-9999 groups
0
Related program: K2 item 33-36
Application: To cluster the ringing station
or answering station of incoming calls on
0
same/different group.
0: Yes, variable
1: No, Immobile
0 Application: Prevent to reprogram the system
by installing the different type of card (eg.
TRK-4 and SLT-4) on the original slot.
2: External amplifier (When K3 item 1 is
programmed to be " 0 ")
3: CO line (Related program: K1 item 30)
3
4: Door phone
6: PABX (1) (Related program: K1 item 65)
7: PABX (2) (Related program: K1 item 66)
Refer to Appendix1 to check incoming directive.
Application purpose of primary key:
F168
0: Not use
1: Functions
2: Station
Application: Enter "extension number" if the user
F168
needs to assign a specific ringing station for CO
line; Enter F128 to route built-in DSP (for ISDK
-26 Plus only)
49
**PGM VER 6.XX**
Welcome ISDK SET
Item
2 0
number
Instruction
5:Physical location, please
refer to the operation code
of Appendix1.