Tone Source / Make Break Program: Kind 8 - Uniphone ISDK-26 Basic Installation & Programming Manual

2.11 Tone Source / Make Break PROGRAM: Kind 8

T-n:00
T-n:00 H:240-223
1111111111111110
2.11.1 Please refer to Appendix II for the channel location.
2.11.2 Each break means the time is set according to K1 item 28. The initial value is 0.2
sec.
2.11.3 Operation steps:
1. Please key in the number for choosing the item, then modify it.
2. Using [*], [#] key to move the cursor. Press [*] key, the cursor moves to
the left; Press [#] key, the cursor moves to the right.
3. If want to listen, press [PAGE] key for shifting.
4. Use adjustable volume key to change the item.
Eg 1. To change 350/440Hz to be 400Hz for internal dialing tone.
Eg 2. To change "On-hold music" to be external "Background music"
4 2 6 5 6
When cursor is here  press [HOLD]
T-n:00 The item 00 application of the item see Appendix II (system tone
source supply of physical location.)
H: a-b (a: tone source of make break 1, b: tone source of make break 0)
Make break 1: on / selection H: 240 channel
Make break 0: off / selection – 223 (mute) channel
These setting numbers mean the ringing range of intercom dialing
tone.
Kind
0
8 HOLD
8
HOLD
T-n:00 H:240-223
1111111111111110
Kind
4
8 HOLD
8
HOLD
T-n:46 H:063-063
1111111111111111
or setting
8
password
Item
0 HOLD 2
number
T-n:00 H:247-223
1111111111111110
Item
6 HOLD
number
T- n:46 H:060-060
1111111111111111
67
Kind 8 HOLD
# 2 2 3
4 7
# 0
0 6 3
6 0