To Change The Flexible Function Number; To Check The Physical Location - Uniphone ISDK-26 Basic Installation & Programming Manual

2.9.2 To change the flexible function number:

Enable the user to change/program the frequent function code.
Line Type : STA12T
L20 V001 P20
Line Type : STA?
L21 V001 P21
Line Type : STA?
L21 F000_ P201
Line Type : STA?
L21 F000 P*5
Notice: 1. Please avoid to enter the doubled numbers. Eg.: *** and ***1
2. System will delete the old setting if there's doubled operating code happened.

2.9.3 To check the physical location:

Enable the user to check the physical location of CO line, station or interface.
Line Type : STA12T
L20 V000 P20
Line Type : STA12T
L21 V001 P21
Line Type : STA12T
L21 V001 P21
Line Type : STA12T
L21 V003 P23
when cursor is here
HOLD
when cursor is here
#
The prefix code switch to F
Input the function number and then HOLD
*5 is the operating code default value of Alarm 1
when cursor is here
HOLD
when cursor is here
Input the extension number and then HOLD
when cursor is here
2 3
HOLD
Physical location V003, Extension number 23
65