Kind 4 (17-34) - Uniphone ISDK-26 Basic Installation & Programming Manual

Kind 4 (17-34)

Item
17
18
19
20
21
22
23 Ringing group of 1
24 Sequential number of doorphone
25 Change the type of installed interface
26 Transmission volume on speaking
27 Ringing time
28 Ringing source play time
29 Ringing source type 1
30 Ringing source type 0
31 Ring format of incoming ring
32 Volume for CO call forwarding
33 Receiving volume of doorphone unit
The color of indicator LED for doorphone
34
using condition
Description
st th
-16 doorphone key
Default
For 16-buttons doorphone only
Please refer to K2 item 46
0: Unlisted
1-99: Serial no
---
Application: If installed more than 1pc of
doorphone.
0: Yes, variable
1: No, Immobile
0 Application: Prevent to reprogram the system by
installing the different type of card on the original
slot.
0-63 scales (standard value: 40, unit: 1dB)
Application: To adjust the transmission volume
40
of doorphone when the callee responses the
caller's volume is too high/low.
0: Keep on ringing
150
1-9999 x 0.1 second
0-9999 x 0.1 second (K1 Item28 setting)
0
Related program: K4 item 29-31
Refer to the Appendix3.
Application: To change the ringing tone of
248
doorphone incoming call.
Eg.: K4 item 29-30 should be set as 063 if want
to change the ringing tone to become music on
248
hold source.
Related program: K3 item 31, K4 item 28
TP:0:0123456789  1:012345
Total 16 bit tone pattern.
0:.123456
Remark: apply to SLT ring format. Please refer
to K3 item 31)
32 0-63 dB (standard: 40, unit 1dB)
0-63 scales (standard: 40, unit 1dB)
Application: To adjust the receiving volume of
32
doorphone when the doorphone volume is too
high/low.
0: only red light
1: red light or green light (when digital key
1
phone set requires two colors of displaying
lights.)
59
Instruction