Lubrication And Maintenance - Baileigh Industrial HSP-110M-HD Operator's Manual

LUBRICATION AND MAINTENANCE

WARNING:
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
 Check daily for any unsafe conditions and fix immediately. In case of leakages, damaged
parts or bare electric cables; do not use the machine before it is repaired.
 Check that all nuts and bolts are properly tightened.
 Lubricate threaded components pivot points and sliding devices.
 Check hydraulic hoses and fittings for leakage.
 Keep area around machine clear of debris.
 Clean the outside of the press with a clean, soft, and dry cloth.
 When not in use, keep the press dry and covered. Keep the ram and piston fully retracted to
prevent rust or corrosion.
 If press efficiency drops, purge air from the hydraulic system.
DO NOT allow lubricant on the frame bed or the heel blocks. Wipe off immediately.
Weekly Maintenance
 On a weekly basis clean the machine and the area around it.
 Apply rust inhibitive lubricant to all non-painted surfaces.
 Check oil level of the hydraulic unit.
 Check electrical connections.
 Check lifting chains.
6 Month Maintenance
 Inspect all hydraulic fittings and hoses and tighten any loose connections.
Make sure the electrical disconnect is OFF before working on
32
32