Assembly And Set Up - Baileigh Industrial HSP-110M-HD Operator's Manual

ASSEMBLY AND SET UP

WARNING:
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
Note: The hydraulic unit weights about 200lbs (95kg). For placing the unit in the
correct position, use and assistant or safe lifting equipment to lift the unit.
During shipping, the hydraulic unit is mounted in the inside of the frame.
To place the unit in working position:
1. Remove the strapping and packing materials holding the hydraulic tank assembly on the
table and to the inside of the frame.
2. Remove and retain the bolts, washers and nuts from the mounting plate on the right side of
the press.
3. Positon the hydraulic assembly on the right side of the press.
4. Align the bolt holes and install and tighten the bolts, washers and nuts removed from the
mounting plate.
5. Route the hydraulic hoses to the hydraulic fitting and matching the number labels (1 to 1 and
2 to 2), one at a time, remove the plugs and install the hoses to the fittings. Tighten securely,
however do not over tighten and distort the swivel fitting collar.
6. Route the hydraulic hoses to the top of the hydraulic cylinder and matching the number
labels (1 to 1 and 2 to 2), one at a time, remove the plugs and install the hoses to the fittings.
Tighten securely, however do not over tighten and distort the swivel fitting collar.
7. Fill the tank with hydraulic oil. The press is shipped without oil. Before starting up, the tank
needs to be filled with hydraulic oil #46 SHELL BRAND or an equivalent with similar
specifications.
8. Remove the filler plug on top of the hydraulic tank.
9. Fill the tank with approximately 26.5gal. (100L) of hydraulic oil.
10. Replace the filler plug.
IMPORTANT: NEVER run the motor with a low oil level. This will damage the
hydraulic unit.
11. Locate, remove and retain the three screws that will secure the motor cover onto the
hydraulic tank and the side of the frame.
For your own safety, DO NOT connect the machine to the
18
18