MATERIAL SELECTION
CAUTION:
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
When selecting materials keep these instructions in mind:
• Material must be clean and dry. (without oil)
• Material should have a smooth surface so it processes easily.
• Dimensional properties of material must be consistent and not exceed the machine capacity
values.
• Chemical structure of material must be consistent.
• Buy certificated steel from the same vendor when possible.
LUBRICATION AND MAINTENANCE
Note: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
• Check daily for any unsafe conditions and fix immediately.
• Check that all nuts and bolts are properly tightened.
• Lubricate threaded components pivot points and sliding devices.
• Check hydraulic hoses and fittings for leakage.
• Keep area around machine clear of debris.
• Clean the outside of the press with a clean, soft, and dry cloth.
• When not in use, keep the press dry and covered. Keep the ram and piston fully retracted to
prevent rust or corrosion.
• If press efficiency drops, purge air from the hydraulic system. See Purging the Hydraulic
System.
DO NOT allow lubricant on the frame bed or the heel blocks. Wipe off immediately.
It must be determined by the customer that materials being
25
25