Assembly And Set Up - Baileigh Industrial TN-250 Operator's Manual

ASSEMBLY AND SET UP

WARNING:
the machine is completely assembled and you have read and understand the entire
instruction manual.
1. Install the hand wheel onto the hub
with the supplied 5/16-18 socket
head screws.
2. Attach the pivot block and indicator assembly onto
the vise assembly using the 1/2-13 bolts and the
retaining plate supplied.
3. The pivot block will fit into the machined recess in
the vise assembly plate.
4. The retaining plate will go on the opposite side of
the vise assembly and is there to act as a support
washer so as not to damage the vise plate from
frequent tightening.
For your own safety, DO NOT connect a powered drill until
11
11