4-6.4.1 Northbridge Configuration - SOLTEK SL-865G Manual

4-6.4.1 NorthBridge Configuration

Choose "NorthBridge Configuration" in "Advanced Chipset Features"
and press <Enter>. The following sub-screen will appear for
configuration:
DRAM Frequency
Configure DRAM Timing by SPD
Memory Hole
Init. Graphic Adapter Priority
Internal Graphics Mode Select
Graphics Aperture Size
Boot Display Device
Flat Panel Type
TV Standard
DRAM Frequency Allows you to set the current SDRAM frequency.
Configure SDRAM
Timing by SPD
NorthBridge Configuration
Auto
Enabled
Disabled
AGP/Int-VGA
Enabled, 8MB
64MB
Auto
640x480LVDS
Auto
Choices: Auto; 266MHz; 333MHz; 400MHz
SPD (Serial presence detect) is a device in memory
module for storing the module information such as
DRAM timing and chip parameters. If this option is
enabled, BIOS will access SPD automatically to
configure module timing. If disabled, DRAM timing
can be configured manually.
Default: Enabled
79
Chapter 4 BIOS Setup
Help Item