4-6.3.2-2 Primary/Secondary IDE Master/Slave and Third/Fourth IDE
Master
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
Primary/Secondary
IDE Master/Slave
Third/Fourth IDE
Master
If any IDE device is detected in any one of the above items press <Enter>
to reveal the IDE information:
Primary/(Secondary/Third/Fourth) IDE Master/(Slave)
Primary/(Secondary/Third/Fourth) IDE Master/(Slave)
Device
: Hard Disk
Vendor
: WDC WD400BB-00DEA0
Size
: 40.0GB
LBA Mode : Supported
Block Mode : 16Sectors
PIO Mode
: 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-5
S.M.A.R.T. : Supported
Type
LBA/Large mode
Block (Multi-Sector Transfer)
PIO Mode
S.M.A.R.T.
32Bit Data Transfer
Type To select the types of the IDE devices:
LBA/Large mode
Block (Multi-Sector
Transfer)
PIO Mode
S.M.A.R.T
32Bit Data Transfer
Press <Enter> To show the detected information of
Primary / Secondary IDE Master/Slave device(s).
Press <Enter> to show the detected information of
third/fourth IDE Master device(s).
Auto
Auto
Auto
Auto
Auto
Disabled
Not Installed; Auto: Setting type automatically
CD-ROM: ATAPI (Packet Interface) CD-ROM drive
ARMD: ATAPI Removable Media Device
To auto-select (default) or disable LBA/Large mode.
To auto-select (default) or disable Block Mode.
To auto-select (default) or disable PIO Mode.
Choices: Disabled; 1, 2, 3, 4
Allows you to enable / disable the Self Monitoring
Analysis and Reporting Technology for the hard disk.
To auto-select (default) or disable 32Bit Data
Transfer.
65
Chapter 4 BIOS Setup
Hard Disk
ATAPI CDROM
Not Detected
Not Detected
Not Detected
Not Detected
Help Item
Select the type of device
connected to the system.