SOLTEK SL-865G Manual page 77

SL-865G / 865G-L
DRAM CAS# Latency With SDRAM Timing by SPD disabled, you can se-
DRAM RAS#
Precharge
DRAM RAS# to CAS#
Delay
DRAM Precharge
Delay
DRAM Burst Length With SDRAM Timing by SPD disabled, you can se-
Memory Hole Allows you to enable / disable (default) the support
Init. Graphics Adapter
Priority
Internal Graphics
Mode Select
AGP Aperture Size Series of options are available: 4, 8, 16, 32, 64, 128,
lect the SDRAM CAS# (Column Address Strode)la-
tency manually.
Choices: 2 Clocks; 2.5 Clocks; 3 Clocks
With SDRAM Timing by SPD disabled, you can se-
lect the SDRAM RAS# (Row Address Strode)
Precharge cycle manually.
Choices: 2 Clocks; 3 Clocks; 4 Clocks
With SDRAM Timing by SPD disabled, you can se-
lect the SDRAM RAS# to CAS# delay cycle
manually.
Choices: 2 Clocks; 3 Clocks; 4 Clocks
Allows you to set the SDRAM Precharge Delay
cycle.
Choices: 5 Clocks; 6 Clocks; 7 Clocks; 8 Clocks
lect the SDRAM Burst length manually.
Choices: 8; 4
of Memory Hole which is reserved for ISA card.
Choices: Disabled; 15MB-16MB
Allows you to select the initial Graphics Adapter.
Choices: AGP/PCI; PCI/AGP;
Allows you to set the internal graphic mode.
Choices: Enabled(1MB; 4MB; 8MB; 16MB; 32MB);
Disabled
256MB. Memory mapped and graphics data struc-
tures can reside in a Graphics Aperture. This area
is like a linear buffer. BIOS will automatically report
the starting address of this buffer to the O.S. The
default setting is 64MB.
80