Temperature Setting; Fan Setting; Swing Setting - Gree XE71-42/G Owner's Manual

Wired Controller XE71-42/G

4.4 Temperature Setting

Under on status, press "˄" or "˅" button on the main page to increase or
decrease set temperature by 1°C (1°F); hold "˄" or "˅" button to increase or decrease
set temperature by 1°C (1°F) every 0.3s.
In cooling, dry, fan and heating mode, temperature setting range is 16°C ~30°C
(61°F ~86°F). There are two circumstances under auto mode: (1) temperature can be
set and the setting range is 16°C ~30°C (61°F ~86°F); (2) temperature can't be set. It
deeps on the unit model.

4.5 Fan Setting

Under on status, press "FAN" button can set fan speed circularly as below.
Low→Medium low→Medium→Medium high→High→Turbo→Auto→Low
Symbols displayed are as shown in the Fig.as below.

4.6 Swing Setting

Under on status, press "SWING" button for swing setting. Two swing modes are
available: fixed-angle swing and simple swing.
Fixed-angle swing: when fixed-angle swing mode is set, swing operation is as
follows:
Figure 4-5 Fan Setting
10