Installation Requirements - Gree XE71-42/G Owner's Manual

No.
Name
Quantity

5.2 Installation Requirements

(1) Prohibit installing the wired controller at wet places.
(2) Prohibit installing the wired controller at the places with direct sunshine.
(3) Prohibit installing the wired controller at the place near high temperature
objects or water-splashing places.
(4) Select proper signal wire of wired controller: two-core signal wire (wire
diameter≥0.75mm; length<30m;suggested length is 8m).
Figure 5-2 Parts of Wired Controller
Table 5.1.1 Standard Parts
1
Panel of Tapping
wired
controller ST3.9×25 MA
1
2
screw Screw M4×25
3
51
Wired Controller XE71-42/G
3 4
Soleplate of
wired
controller
2 1