Gree XE71-42/G Owner's Manual page 24

4.7.7 Save Function Setting
Under on status, after entering into user function page, press "˄" or "˅" button to
select save function and press "˂" or "˃" button to turn on or turn off save function.
Press "MENU/OK" button to enter save function setting page.
After entering save function setting page, press "˂" or "˃" button to select cooling
or heating limitation temperature. After that, press "˄" or "˅" button to adjust limitation
temperature value. Once setting is finished, press "MENU/OK" button to save the
setting.
NOTE!
When save function has been set, auto mode cannot be set.
4.7.8 Auxiliary Heating Function Setting
Under on status, after entering into user function page, press "˄" or "˅" button to
select auxiliary heating function and press "˂" or "˃" button to turn on or turn off this
function with auto saving.
NOTE!
This function can be set only in heating mode.
4.7.9 Dry Function Setting
Under on status, after entering into user function page, press "˄" or "˅" button to
select dry function and press "˂" or "˃" button to turn on or turn off this function with
Wired Controller XE71-42/G
19