Temperature Setting; Fan Setting - Gree XK49 Owner's Manual

" " will light up.

4.3 Temperature Setting

Pressing "
by 1°C; holding "
every 0.3s. In Cooling, Fan, Heating, Dry mode, temperature setting range is
16° C~30° C.
Note:
Under Auto mode, the unit temperature can not be adjusted by "
①
button.
②
When the wired controller is connected with a Fresh Air Indoor Unit, fresh air
indoor unit code "FAP" will be displayed as shown below. Setting temperature
won't be displayed and can't be adjusted "
temperature in cooling or heating can only be set in the parameter setting
status.

4.4 Fan Setting

Under On status, pressing FAN button can set fan speed circularly as:
Note:
In Dry mode, fan speed is low and can't be adjusted.
①
②
When the wired controller is connected with a Fresh Air Indoor Unit, fan speed
of indoor unit will be high fan speed only. Fan speed of indoor unit can't be
adjusted via "FAN" button
" or " " button in On status increases or decreases set temperature
" or " " button increases or decreases set temperature by 1°C
" or "
18
Wired Controller XK49
" or "
" button. The air outlet
"