Setting Of Temperature - Gree XE70-33/H Owner's Manual

Wired Controller XE70-33/H
NOTES:
① The supporting modes differs due to different models, the wired controller will
automatically select the setting range of mode according to model of IDU;
② Only the master IDU in the master-slave mode can set the Auto mode (It is
not applicable to heat recovery units);
③ Instructions for mode switch:
a) For heat recovery units, anyone of IDU can switch mode arbitrarily;
b) For other units, when the system mode priority is the master-slave mode,
the system mode will be subject to the mode of master IDU; the master
IDU can switch mode arbitrarily, while the slave IDU cannot switch to the
mode which may conflict to the mode of master IDU; when the master
IDU changes the mode and leads to confliction of modes between slave
IDU and the system, the operating mode of slave IDU will automatically
switch to the system mode.

7.3 Setting of Temperature

Under ON status, press "
decrease with the unit of 1 ℃ ; when press and hold these two buttons, the
temperature will increase or decrease with the unit of 1℃ in every 0.3 second.
Under Cool ,Fan, Heat, Floor, 3D Heat and Space modes, the temperature
setting range is 16℃~30℃.
Under Dry mode, the temperature setting range is 12℃, 16℃~30℃. Under Dry
" or " " button, the set temperature will increase or
38