Gree XE71-42/G Owner's Manual page 20

Function
Low-temperature
drying function
Setback function
Independent
swing function
Panel lifting
function
WiFi function
Auto clean
function
4.7.1 Fresh Air Function Setting
Under on status, after entering into user function page, press "˄" or "˅" button to
select fresh air function and press "˂" or "˃" button to turn on or turn off air function.
Press "MENU/OK" button to enter into the setting page of fresh air mode.
After entering into the setting page of fresh air, press "˄" or "˅" button to adjust
the mode. There are 10 setting modes. Once setting is finished, press "MENU/OK"
button to save the setting.
The unit runs the dry mode at a lower set temperature to
improve the drying capacity.
After shutdown, the unit will automatically run to ensure that
the indoor ambient temperature is within the set
temperature range.
It can set the swing mode with 4 swing air outlets to satisfy
the users in different air outlet directions.
The panel can come down to let the user to clean the filter.
Turn on, turn off or reset WiFi. (The unit should support
WiFi Function and the G-Cloud accessories should be
purchase separately for installation)
Unit will operate the self-cleaning process of
evaporator.( This function is applicable for some models)
Wired Controller XE71-42/G
Instruction
15