General Cleaning - Structural Concepts ADDENDA 86772 User Manual

GENERAL CLEANING

FREQUENCY
Daily End Panels, Front Panel, Toe-Kicks, Etc.: Wipe off all surfaces with warm water and
mild soap solution and non-abrasive cloth.
Daily Wood, Laminate and Painted Surfaces (Including Shelves): Clean with mild soap
and water solution and a soft cloth.
Daily ENGINEERED (SYNTHETIC) QUARTZ: See next page.
Daily Glass Doors and Angled Internal Mirror: Clean glass door surfaces with a household
or commercial glass cleaner. Wipe dry with paper towel or soft cloth.
Daily Wire Shelving Racks:
•
•
Weekly Napkin Dispenser / Waste Bin Area:
•
•
•
Quarterly Under Case Cleaning: Remove front toe-kicks (screw removal is required). Use a
broom or vacuum to remove dust and dirt that may collect at underside of case.
Quarterly Axial Fans Atop Case (Optional) / Authorized Personnel Only
•
•
•
•
Wipe down with warm water and mild soap solution and non-abrasive cloth.
For hardened residue, remove from case. Submerse in warm soapy water. Use
soft-bristled brush to dislodge caked on and hardened residue. Rinse. Wipe dry with
paper towel or soft cloth.
Napkin dispenser: Remove napkin box. Wipe down areas with warm water and mild
soap solution and non-abrasive cloth. Wipe dry with paper towel or soft cloth.
Waste bin area: Flip-up door, reach in and remove waste bin. Wipe down waste bin
area with warm water and mild soap solution and non-abrasive cloth. Wipe dry with
paper towel or soft cloth.
See FRONT FLIP-UP DOOR / WASTE BIN ACCESS (CERTAIN MODELS ONLY)
section in this manual for illustration.
Caution! Disconnect power to unit before proceeding!
Wipe down areas around fan housing that can collect dust and debris.
If fan design allows, wipe down fan blades that can collect dust and debris.
Restore power to unit after performing this cleaning process.
INSTRUCTIONS
15