TESY EVHP 9S 260 60 Instructions For Use Manual page 33

3 CONSTRUCTION CHARACTERISTIC
1 Heat pump.
2 Control panel.
Enclosure – PVC jacket.
3
Steel tank (storage
4
enamelling (capacity: 200; 260 litres).
5 Upper storage tank probe.
6 Lower storage tank probe.
7 Coolant recharge.
8 Ambient air recirculation fan.
9 Throttle valve.
High-efficiency
10 quantity of fluid put into this is regulated by an
appropriate thermostatic valve.
11 Air inlet (∅ 160 mm).
12
Air outlet (∅ 160 mm).
13 Hermetically-sealed rotary compressor.
14 Replaceable magnesium anode.
(1.5 kW – 230 W) Electric heating element
15
16 Condenser pump discharge line.
17 Condenser return.
18 Replaceable magnesium anode.
Hot water outlet connection joint (G 1").
19
Recirculation fitting (G ¾").
20
Inlet, coil fitting for solar thermal power system
21
2
(G 1"; 1 m
exchange surface).
Condensates drain (G 1/2").
22
Outlet, coil fitting for solar thermal power sys-
23
2
tem (G 1"; 1 m
surface).
Cold water inlet connection joint (G 1").
24
25 50 mm polyurethane insulation.
26 Automatic resetting safety pressure switch.
tank) with double
finned evaporator. The