More Settings - Sartorius SECURA1102-1NUS User Manual

More settings

Set password
Reset settings
USB mass storage
Enable service mode
6.2.11 More Settings
Additional service functions for the balance can be found here .
Set password menu option (Secura
Secura ® models can be password-protected to prevent unauthorized personnel from
making changes to the system settings of the balance .
When a user password is set, all settings which could change the metrological
behavior of the balance are locked .
Select t .
t
Enter a number as a password .
t
To make corrections to the entry:
– k button: delete individual characters .
C
– button: delete all characters .
Enter the password again to ensure correct entry .
t
Confirm with l .
t
The new password will only be applied after returning to the first level of the
t
menu .
To change the password, the old password must first be entered .
A new password can then be set .
To completely delete the password and use the balance without password protection,
leave the entry blank .
Contact the Sartorius Service Center if you forget the password .
Reset settings
menu option:
Reset all balance settings to the factory (default) settings here .
When the prompt appears, select
t
reset and restarts .
USB mass storage menu option:
Use this function to register the balance memory as a USB removable data carrier on
a PC . This function is required by the Sartorius Service Center or when installing the
PC driver for the virtual COM port . Further information can be found in Chapter "USB
Port" on page 79 .
Enable service mode menu option:
This function is used by the Sartorius Service Center and can only be accessed by
authorized Service Center personnel . The following service functions are available:
– Preset value for minimum weighing (SQmin)
– Enter date for next service
– Reset all settings to factory settings
The Calibration/Adjustment
authorized Service personnel (depending on the model):
– External linearization (not for use in legal metrology)
– Set the preload
– Delete the preload
These functions are not available for verified and sealed balances .
System Settings (Setup Menu)
only):
®
Yes, reset
and confirm with
menu also provides the following functions for
User Manual Secura
l . The balance is
39
® , Quintix ® , Practum ®