Table of Contents
Advertisement
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JPG1
VGA Enable/Disable
JPQAT1
QAT Enable/Disable
JPQAT2
QAT Enable/Disable
JPL1
GLAN Enable/Disable
JPME2
Manufacturing Mode
JWD1
Watch Dog Timer Enable
JP1
BIOS Advance Function
LED
Description
LED1
UID LED
LED6
CPLD Heartbeat LED
LEDM1
BMC Heartbeat LED
Connector
Description
BT1
Onboard CMOS battery
FAN1 ~ FAN8
System/CPU fan headers (FAN1: CPU Fan)
JCOM1
COM port
JIPMILAN
Dedicated IPMI LAN port
JS1 (I-SATA0 ~I-SATA7)
SATA 3.0 ports supported by Intel PCH
JF1
Front Control Panel header
JGPW1 - JGPW4
Power connectors used for GPU and VGA devices
JIPMB1
System Management Bus header for IPMI 2.0
JL1
Chassis intrusion header
JRK1
Intel RAID key header for NVMe Solid State Devices (SSD)
JSDCARD1
SD card socket
JSD1 - JSD2
SATA Disk-on-module (DOM) power connectors
JSW0/JSW1
Switch I²C
JTPM1 TPM/PORT80
Trusted Platform Module/Port 80 connector
JUIDB2
Unit Identifier (UID) switch
JUSB3 USB4/5 (3.0)
Internal USB header for two USB 3.0 connections (USB4/5)
JUSB1 USB2/3 (3.0)
USB 3.0 rear port (USB2/3)
USB0/1
USB 2.0 header
JUSBA1
Type A USB 3.0 header
PSU1
Power Supply Unit 1
PSU2
Power Supply Unit 2
S-SATA0/S-SATA1
(Powered) SATA connectors with power-pins built-in with support of SuperDOMs
SXB1A
WIO Left Riser slot (see note below)
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 2-3 (Disabled)
When JPQAT1 is Enabled:
Pins 1-2 x16 Uplink
Pins 2-3 x8 Uplink (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Pins 2-3 (Normal)
Status
Solid Blue: Unit Identified
Blinking Green: Normal
Blinking Green: Normal
13
Chapter 1: Introduction
Advertisement
Table of Contents
