Supermicro SuperStorageServer 1029P-NES32R User Manual page 83

Table of Contents

Chapter 6: UEFI BIOS

VMD port 2C (Available when the device is detected by the system)

Select Enable to use the Intel Volume Management Device Technology for this spe-

cific root port. The options are Disable and Enable.

Hot Plug Capable (Available when the device is detected by the system)

Select Enable to enable hot plug support for PCIe root ports 2A~2C, which will allow

the user to change the devices populated on PCI-E Slots 2A~2C without turning off

the system. The options are Disable and Enable.

VMD Config for PStack2

Intel® VMD for Volume Management Device

Select Enable to use the Intel Volume Management Device Technology for this stack.

The options are Disable and Enable.

*If the item "Intel VMD for Volume Management Device" above is set to Enable,

the following items will be dislayed:

Hot Plug Capable (Available when the device is detected by the system)

Select Enable to enable hot plug support for PCIe root ports 3A~3D, which will allow

the user to change the devices populated on PCI-E Slots 3A~3D without turning off

the system. This will allow the user to replace the components without shutting down