Table of Contents
Advertisement
Intel® QuickAssist Technology (QAT) Enable/Disable
The X11DSF-E supports Intel® QuickAssist Technology (Intel QAT), which offers high-profile
security and compression acceleration to standard server platforms in a software-defined
infrastructure. JPQAT1 is used to enable or disable QAT support. JPQAT2 (with JPQAT1
Enabled) allows the user to select the desired link. See the table below for jumper settings.
JPQAT1
0
0
1
1
VGA Enable/Disable
JPG1 allows you to enable or disable the VGA port using the onboard graphics controller.
The default setting is Enabled.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.
QAT Enable/Disable
Jumper Settings
JPQAT2
Setting 1-2: 1 (Enabled) Setting 2-3: 0 (Disabled)
0
x16 to RSC-X-66
1
No Connection
0
x8 to PCH QAT, x8 to RSC-X-66
1
x16 to PCH QAT
VGA Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
Manufacturing Mode Select
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal (Default)
Pins 2-3
Manufacturing Mode
59
Chapter 4: Motherboard Connections
Advertisement
Table of Contents
