Ethernet Ports - Supermicro SuperStorageServer 1029P-NES32R User Manual

SuperServer 1029P-NES32R User's Manual
Serial Port
There is one COM Header (JCOM1) near the I/O back panel, next to the IPMI LAN connector.
The COM Header provides serial communication support. See the table below for pin
definitions.
VGA Port
The VGA connector (JVGA) is located below the JSIOM slot and next to JTPM1 connector.
Use this connection for VGA display.

Ethernet Ports

A dedicated IPMI LAN that supports GbE LAN is located on the backplane. All Ethernet ports
accept RJ45 type cables. Please refer to the LED Indicator Section for LAN LED information.
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB3/4) located on the rear IO panel, and two internal USB
3.0 ports (USB5/6) located above JUSBA1 for front access. There are also two USB 2.0 ports
(USB0/1) located at JUSB3 for front access. USB header JUSBA1 is a Type A USB header
and is located next to JPWR2. This header also provides one USB 3.0 (USB7) connection
for front access.
Front Panel USB4/5 (3.0)
Pin Definitions
Pin# Definition
1
VBUS
2
Stda_SSRX- 18
3
Stda_SSRX+ 17
4
GND
5
Stda_SSTX-
6
Stda_SSTX+ 14
7
GND
8
D-
9 D+
10
Type A JUSBA1 (3.0)
Pin Definitions
Pin# Definition
VBUS
1
USB_N
2
USB_P
3
Ground
4
Pin# Definition
19 Power
USB3_RN
USB3_RP
16 GND
15 USB3_TN
USB3_TP
13 GND
12 USB_N
11 USB_P
x
Pin# Definition
5 SSRX-
6 SSRX+
7 GND
8 SSTX-
9 SSTX+
54
Back Panel USB 2/3 (3.0)
Pin Definitions
Pin# Definition Pin# Definition
A1 VBUS B1 Power
A2 D- B2 USB_N
A3 D+ B3 USB_P
A4 GND B4 GND
A5 Stda_SSRX- B5 USB3_RN
A6 Stda_SSRX+ B6 USB3_RP
A7 GND B7 GND
A8 Stda_SSTX- B8 USB3_TN
A9 Stda_SSTX+ B9 USB3_TP
Front Panel USB 0/1 (2.0)
Pin Definitions
Pin# Definition Pin#
1 +5V 2
3 USB_N 4
5 USB_P 6
7 Ground 8
9 Key 10
Definition
+5V
USB_N
USB_P
Ground
NC