Table of Contents
Advertisement
M.2 Tray Installation
Use the procedure below for M.2 Tray installation.
Installing the M.2 NVMe Tray
1. Use an anti-static strap and anti-static precaustions when handling the tray and its parts.
2. Install the M.2 adapter board.
Figure 3-8. Installing the M.2 Adapter Board
3. Install the clip holder and M.2 NVMe module with 42-mm, 60-mm and 80-mm length (no
screw required).
Figure 3-9. Installing the Clip Holder and 42/60/80-mm M.2 NVMe Module
4. Install the M.2 module with 110-mm length, if available (one screw required).
Figure 3-10. Installing the 110-mm M.2 NVMe Module
Chapter 3: Maintenance and Component Installation
44
Advertisement
Table of Contents
