Chassis Components; Storage - Supermicro SuperStorageServer 1029P-NES32R User Manual

Table of Contents

Advertisement

3.4 Chassis Components

Storage

The SC121EF supports up to thirty-two hot-swappable E1.S SSDs. These drives can be
removed without powering down the system. Only E1.S SSDs qualified by Supermicro are
recommended. The E1.S SSDs may be installed and removed easily from the chassis:
The SC121EF supports up to 32 E1.S
1
SSDs, which are accessible from the
front of the chassis.
The E1.S SSDs are installed on drive
trays that can be easily removed and/
2
or replaced by unlocking the tray's
using a lever, as shown.
Figure 3-4. Removing the E1.S SSD Drive Trays
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at
supermicro.com.
Chapter 3: Maintenance and Component Installation
Pull up lever to unlock.
40
Lever in unlocked position.
http://www.

Advertisement

Table of Contents
loading

Table of Contents