Table of Contents
Advertisement
SuperStorageServer 1029P-NES32R User's Manual
E.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. Press [DEL] key to enter BIOS.
4. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel® VMD Technology > CPU1 & CPU2.
5. Enable the VMD according to the following rules.
•
For U.2 NVMe, enable all the sub-items under each PStack, based on the your model
server:
CPU1
VMD Config for PStack0
•
For M.2 NVMe or NVMe AIC, enable the VMD according to which AOC card/slot it used.
An example U.2 configuration follows.
CPU1 Configuration
Figure E-2. BIOS VMD Setting Example for 24 Drives
VMD BIOS Setting for 1029P-NES32R
CPU2
VMD Config for PStack1
CPU2 Configuration
142
Advertisement
Table of Contents
