Recommended Filter Sizes - Badger Meter Oval Gear LM OG Series User Manual

LM OG Baureihe / LM OG Series / Série LM OG
• Turn off any associated pumps to reduce line pressure and slowly fill the line and meter with fluid before restarting pumps .
Doing so reduces the possibility of meter damage caused by errant air pressures in the line and meter .
• Make sure all pipe conforms to the same pressure output rating as the pump .
• Make sure to apply thread sealant to all pipe threads .
• Make sure to install the meter as shown in
• Check for and repair leaks upon initialization of fluid flow .

Recommended Filter Sizes

Strainer / Pore size (in mesh)
1/2"
Please check all connections to leakage . After the installation, we recommend doing several transactions into an approved
tank . Should the use of different oil viscosities show discrepancies by the error limit, this can immediately be corrected at the
site . This avoids the need to remove or exchange the meter . In case of pretested meters, corrections can be carried out by
technicians or officials of the National Weights and Measure Laboratory .
Seite / Page / Page 16
"Figure 1: Meter installation" on page
60
Strainer / Pore size (in mm)
0 .250
AUT-UM-03446-DE-02
15 .
April/April/Avril 2023