Badger Meter ORION Installation & Programming Manual
Automated meter reading system
Hide thumbs
Also See for ORION:
- Installation & operation manual (64 pages) ,
- Installation & operation manual (72 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Badger Meter ORION
Summary of Contents for Badger Meter ORION
- Page 1 Installation & ® ORION Programming Repeater Automated Meter Reading System Manual for Installer IMPORTANT: This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. ORI-IOM-44 BadgerMeter, Inc. P/N 62014-070 Rev. 1 4-05 ®...
- Page 2 Questions or Service Assistance If you have questions regarding the product or this document contact: Badger Meter, Inc. P.O. Box 245036 Milwaukee, WI 53224-9536 Telephone: (800) 456-5023 Fax: (888) 371-5982 On the Web: www.badgermeter.com or call your local Badger Meter representative.
-
Page 3: Table Of Contents
Table of Contents Warning Label Information......................4 Scope of Manual.........................4 Product Unpacking and Inspection .....................4 Transmitter Description.......................5 ® ORION Repeater ........................5 Locating the Unit.........................5 Programming the Repeater ......................5 Programming with a Laptop......................6 ® ® Programming with a Badger -Radix ..................8 Specifications ...........................11... -
Page 4: Warning Label Information
SCOPE of MANUAL This manual contains installation instructions ® for the ORION Repeater for use with any water or gas ORION transmitter. Proper performance and reliability of the ORION Repeater depends upon installation in accordance with these instructions. PRODUCT UNPACKING AND INSPECTION... -
Page 5: Transmitter Description
ORION Repeater cannot repeat the message. ORION Repeaters can be easily programmed in the field using either the ORION Mobile The ORION Repeater is constructed of a ® ® Reading Laptop or the Badger... -
Page 6: Programming With A Laptop
6. A message box appears saying, The meter type is UNKNOWN. Select [OK]. 2. On the computer desktop, open the ORION Laptop Programmer by double- clicking the icon. 7. Select START RADIO. 3. Connect the Optical programmer to the 9-pin connector on the laptop PC. - Page 7 NOTE: Do not enter the leading 7 of the Transmitter Serial Number. 13. Swipe the programming magnet over ® the bottom right corner of the ORION Repeater to put the unit into programming mode. Once the ORION Repeater has been put into...
-
Page 8: Programming With A Badger -Radix
2. At the “Main Menu”, select [Program & numbers in the repeater, swipe the Quick Read] <Q>. magnet across the programming location on the ORION Repeater. BE CERTAIN THAT THE PROGRAMMING ACCESSORY IS EITHER TURNED OFF OR NOT IN RANGE OF THE... - Page 9 Click the <Delete> key until the Odometer Entry box is empty. A message will appear on the screen “The ® ORION Transmitter has an invalid meter type and needs to be returned to Badger Meter for servicing.” Select OK <Enter>.
- Page 10 Programming Accessory. 15. Swipe the programming magnet over ® the bottom right corner of the ORION Repeater to put the unit into programming mode. Once the ORION Repeater has been put into programming mode, it will listen for a signal from the Programming Accessory for up to 16 seconds.
-
Page 11: Specifications
16. As soon as you are done programming Program Accessory to a transmitter ® an ORION Repeater, it is important to number of ‘0’ and place the ORION turn off your Programming Accessory. Repeater in programming mode using Turn off the Programming Accessory by the steps above. - Page 12 Please see our website at www.badgermeter.com BadgerMeter,Inc. for specific contacts. P.O. Box 245036, Milwaukee, WI 53224-9536 (800) 876-3837 / Fax: (888) 371-5982 www.badgermeter.com ® Copyright © Badger Meter, Inc. 2005. All rights reserved.