Table of Contents
Advertisement
11.28 "Buttons on product" (Enable/disable settings)
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
In this display, you can disable the possibility of making settings.
Grundfos GO
If you set the buttons to "Not active", the buttons on the standard
control panel are disabled. If you set the buttons to "Not active"
on pumps with an advanced control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use the buttons to
navigate through the menus but you cannot make changes in the
Settings menu.
When you have disabled the possibility to make settings, the
symbol appears in the display.
To unlock the pump and allow settings, press
simultaneously for at least 5 seconds.
Standard control panel
The
button always remains active but you can only unlock all
other buttons on the pump with Grundfos GO.
Factory setting
See section
28. Factory
settings.
11.29 Delete history
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
In this menu, you can delete the following historic data:
•
"Delete operating log".
•
"Delete heat energy data".
•
"Delete energy consumption".
11.30 Define Home display
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
This menu is only available in the advanced control panel.
In this menu, you can set the Home display to show up to four
user-set parameters.
11.31 Display settings
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
This menu is only available in the advanced control panel.
In this menu you can adjust the display brightness and set
whether or not the display is to turn off if no buttons have been
activated for a period of time.
"Buttons on product"
●
●
and
Delete history
●
●
Define Home display
●
●
Display settings
●
●
11.32 "Store settings" (Store actual settings)
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
Grundfos GO
In this menu, you can store the actual settings for later use in the
same pump or in other pumps of the same type.
Advanced control panel
In this menu, you can store the actual settings for later use in the
same pump.
11.33 "Recall settings" (Recall stored settings)
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
Grundfos GO
In this menu, you can recall stored settings from a number of
previously stored settings that the pump then uses.
Advanced control panel
In this menu, you can recall the last stored settings that the pump
then uses.
11.34 "Undo"
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
This menu is only available in Grundfos GO.
In this display, you can undo all settings that have been made
with Grundfos GO in the current communication session. You
cannot undo a Recall stored settings action.
11.35 "Pump name"
Pump variant
NBE, NBSE, NKE, TPE, TPED
NBE, NBSE, NKE, TPE, TPED
Series 2000
This menu is only available in Grundfos GO.
In this display, you can give the pump a name. In this way, you
can easily identify the pump when connecting with Grundfos GO.
Factory setting
See section
28. Factory
settings.
"Store settings"
●
●
"Recall settings"
●
●
"Undo"
●
●
"Pump name"
●
●
41
Advertisement
Table of Contents
