Table of Contents
Advertisement
9. Advanced control panel
Pump variant
Fitted as standard
NBE, NBSE, NKE, TPE,
TPED
NBE, NBSE, NKE, TPE,
TPED Series 2000
6
Fig. 21 Advanced control panel
Pos.
Symbol
Description
Grundfos Eye
Shows the operating status of the pump.
1
For further information, see section
15. Grundfos
2
-
Graphical colour display.
3
Goes one step back.
Navigates between main menus, displays
and digits.
When you change the menu, the display
always shows the top display of the new
menu.
Navigates between submenus.
Changes value settings.
4
Note: If you have disabled the possibility to
make settings with the Enable/disable
settings function, then you can enable it
again temporarily by pressing these buttons
simultaneously for at least 5 seconds. See
section
11.28 "Buttons on product"
Enable/disable settings
(
Saves changed values, resets alarms and
expands the value field.
Enables radio communication with Grundfos
GO and other products of the same type.
When you try to establish radio
communication between the pump and
Grundfos GO or another pump, the green
4
indicator light in Grundfos Eye flashes. A
note also appears in the pump display stating
that a wireless device wants to connect to
the pump. Press
panel to allow radio communication with
Grundfos GO and other products of the same
type.
Option
●
-
●
-
1
2
3
4
5
Eye.
).
on the pump control
Pos.
Symbol
Description
Makes the pump ready for operation and
starts, and stops the pump.
Start:
If you press the button when the pump is
stopped, the pump only starts if no other
functions with higher priority have been
5
enabled. See section
Stop:
If you press the button when the pump is
running, the pump is always stopped. When
you stop the pump via this button, the
icon appears in the bottom of the display.
Goes to the Home menu.
6
14. Priority of
settings.
15
Advertisement
Table of Contents
