Original installation and operating instructions. 2. General information These installation and operating instructions are a supplement to CONTENTS installation and operating instructions for standard CR, CRI, CRN pumps, publication No 96462123, and for CRN-SF pumps, Page publication No 96530119. Symbols used in this document General information 3.
Disconnecting the barrier fluid supply pipe • Disconnect the barrier fluid supply pipe from the intensifier. Starting up the pump • See also the installation and operating instructions for standard CR, CRI, CRN pumps. • Start the pump, and check the direction of rotation.
Note: A non-return valve must be fitted to the inlet pipe. Starting up the pump • See also the installation and operating instructions for standard CR, CRI, CRN pumps. • Open the isolating valve on the discharge side.
This product or parts of it must be disposed of in an environmentally sound way: 1. Use the public or private waste collection service. 2. If this is not possible, contact the nearest Grundfos company or service workshop. Subject to alterations.
Page 9
Norway Turkey Siu Wai Industrial Centre Phone: +387 33 592 480 GRUNDFOS Pumper A/S GRUNDFOS POMPA San. ve Tic. Ltd. Sti. 29-33 Wing Hong Street & Telefax: +387 33 590 465 Strømsveien 344 Gebze Organize Sanayi Bölgesi 68 King Lam Street, Cheung Sha Wan www.ba.grundfos.com...
Need help?
Do you have a question about the CR and is the answer not in the manual?
Questions and answers